Bénéteau S.A- Océanis 473 Clipper GTE- Year Built for sale

sboat
5
1 / 13
1 / 13
x
XBOAT ref :1267.
BENETEAU S.A
- OCEANIS 473 CLIPPER GTE
- Year built 2003
- 3 cabin version
- 3 shower rooms / 3 WCs
- large draft 2.10 m
- overall length: 14.30 m
- hull length: 14.15 m
- width: 4.31 m
- air draft: 18.10 m
- approximately weight: 14000 KG
- CE design category: A - 10 passengers
- B - 12 passengers / C - 12 passengers / D - 14 passengers

This sailboat is ready to sail.
Sailing never rented.
Currently based in northern Brittany, she sailed in August 2023 to Gibraltar in excellent conditions.
Its current owner (3rd owner) is an experienced skipper and sailor who has owned several beautiful units.

He will be able to pass on some of his experience to you so that you can take possession of this beautiful sailboat in the best conditions.
Handling and advice guaranteed!

The boat is up to date in terms of safety (deep sea navigation)
It has NEW sails and many recent equipment.

A "blue hull" hull painting will be required, an arrangement is possible with the owner on this subject.

Additional information, inventory and photos, on request, only with all of your contact details via the contact form.

LISTS OF MAIN WORK CARRIED OUT:
The Sails are NEW!
1 horizontal section genoa of 67 m2 in thick Dacron + extra wide UV strip (2023)
1 fully battened “full batten” mainsail of 43 m2 in thick dacron (2023)
1 complete lazzy bag (2023)
Ball carriages to facilitate raising and lowering the mainsail (2023)
1 Spinnaker/Gennaker CODE 0 on furler with a surface area of ​​180 m2 (2020)
+ 1 bowsprit (2020)
1 NV brand roof hood with stainless steel handrail (2023)
1 HARKEN 40 electric winch (installed in 2022) with its interior cabin cover
Sheathing of the 2 wheel bars (2023)
Lubrication of all winches (2023)
The majority of halyards (replaced in 2023)
RAYMARINE STX30 autopilot (new 2024)
ST 70 pilot exterior display (new 2024)
VETUS bow thruster motor (replaced in 2021)
Electric windlass dismantled and checked + new remote control + installation of an electric control in the cockpit (2023)
Anchor 25KG galvanized + lead (2024)
90 meters of 10mm chain (made in 2022)
6-person life raft (purchase 2022)
Rear stainless steel gantry (installed in 2023)
2 solar panels 2 X 130 W (2023)
1 charge regulator for solar (2023)
4 service batteries of 160 AH (2021)
New VICTRON battery charger (2022)
NAVICOM fixed touchscreen VHF with AIS receiver (2023)
Tablet support installed at the steering wheel + under the roof hood + 12 V socket (2023)
Rudder angle indicator (2023)
RAYMARINEST 6001 auto pilot repeater (replaced 2023)
Saloon cushion foams (replaced in 2022)
Front cabin mattress (replaced in 2022)
Hot water tank (2019)
WEBASTO heating (dismantled, cleaned 2022)
1 forward cabin deck porthole (currently being replaced in 2024)
Saffron rings (replaced in 2023)
lip gland (replaced in 2023)
re-aligned shaft line (2023)
hydrolube ring replaced (2023)
complete engine maintenance (2023)
timing belt (2022)
exhaust elbow (2021)
turbo (replaced in 2021)
alternator (recent)
complete treatment of the livework (full sanding of the hull + epoxy primer + antifouling (2023)
+ various things etc.

BOAT UP TO DATE AND READY FOR NAVIGATION
The boat will be sold with an engine overhaul (drain, filters, anodes)
As well as handling if desired by the new owner More details and pictures on xboat.uk
... » whole text » less text
Price
€ 149,000
VAT paid, VAT paid in: EU, VAT stated
Boat ID
s227985
Model
Bénéteau S.A- Océanis 473 Clipper GTE- Year Built
Boat builder
Bénéteau
Designer
Finot/conq
Boat type
sailboat
Boat category
sailing yacht
Category
used boat
Year built
2003
Condition
good
Hull material
GRP/polyester
Location
France, St Brieuc
Flag
France
Registration type
private
Registration port
France Bretagne Nord
Keel type
fixed keel

Technical data

Length
14.15 m (46 feet)
Beam
4.31 m (14.1 feet)
Draught
2.10 m (6.9 feet)
Cabins
3
berths
8
No. of showers
3
No. of toilets
1
Fuel tank
235 ltr, GRP
Propulsion
shaft drive

Engine

Engine 1
Engine type
inboarder
Model
Volvo Penta Timray 22
Power
75 hp (55 kW)
Fuel
diesel
Engine hours
ca. 2,900

Equipment [ + ]

Navigation

VHF radio, compass, autopilot

Technical equipment

underwater paint, anchor windlass bow electric, thruster - bow thruster, battery charger

Deck equipment

teak deck, teak cockpit, gangway

Interior equipment

oven, freezer, refrigerator - electric

Entertainment instruments

TV antenna / DVB-T, TV

Safety

life raft

Persennings

sprayhood

Sails

spinnaker, gennaker

Other information

BENETEAU S.A
- OCEANIS 473 CLIPPER GTE
- Year built 2003
- 3 cabin version
- 3 shower rooms / 3 WCs
- large draft 2.10 m
- overall length: 14.30 m
- hull length: 14.15 m
- width: 4.31 m
- air draft: 18.10 m
- approximately weight: 14000 KG
- CE design category: A - 10 passengers
- B - 12 passengers / C - 12 passengers / D - 14 passengers

This sailboat is ready to sail.
Sailing never rented.
Currently based in northern Brittany, she sailed in August 2023 to Gibraltar in excellent conditions.
Its current owner (3rd owner) is an experienced skipper and sailor who has owned several beautiful units.

He will be able to pass on some of his experience to you so that you can take possession of this beautiful sailboat in the best conditions.
Handling and advice guaranteed!

The boat is up to date in terms of safety (deep sea navigation)
It has NEW sails and many recent equipment.

A "blue hull" hull painting will be required, an arrangement is possible with the owner on this subject.

Additional information, inventory and photos, on request, only with all of your contact details via the contact form.

LISTS OF MAIN WORK CARRIED OUT:
The Sails are NEW!
1 horizontal section genoa of 67 m2 in thick Dacron + extra wide UV strip (2023)
1 fully battened “full batten” mainsail of 43 m2 in thick dacron (2023)
1 complete lazzy bag (2023)
Ball carriages to facilitate raising and lowering the mainsail (2023)
1 Spinnaker/Gennaker CODE 0 on furler with a surface area of ​​180 m2 (2020)
+ 1 bowsprit (2020)
1 NV brand roof hood with stainless steel handrail (2023)
1 HARKEN 40 electric winch (installed in 2022) with its interior cabin cover
Sheathing of the 2 wheel bars (2023)
Lubrication of all winches (2023)
The majority of halyards (replaced in 2023)
RAYMARINE STX30 autopilot (new 2024)
ST 70 pilot exterior display (new 2024)
VETUS bow thruster motor (replaced in 2021)
Electric windlass dismantled and checked + new remote control + installation of an electric control in the cockpit (2023)
Anchor 25KG galvanized + lead (2024)
90 meters of 10mm chain (made in 2022)
6-person life raft (purchase 2022)
Rear stainless steel gantry (installed in 2023)
2 solar panels 2 X 130 W (2023)
1 charge regulator for solar (2023)
4 service batteries of 160 AH (2021)
New VICTRON battery charger (2022)
NAVICOM fixed touchscreen VHF with AIS receiver (2023)
Tablet support installed at the steering wheel + under the roof hood + 12 V socket (2023)
Rudder angle indicator (2023)
RAYMARINEST 6001 auto pilot repeater (replaced 2023)
Saloon cushion foams (replaced in 2022)
Front cabin mattress (replaced in 2022)
Hot water tank (2019)
WEBASTO heating (dismantled, cleaned 2022)
1 forward cabin deck porthole (currently being replaced in 2024)
Saffron rings (replaced in 2023)
lip gland (replaced in 2023)
re-aligned shaft line (2023)
hydrolube ring replaced (2023)
complete engine maintenance (2023)
timing belt (2022)
exhaust elbow (2021)
turbo (replaced in 2021)
alternator (recent)
complete treatment of the livework (full sanding of the hull + epoxy primer + antifouling (2023)
+ various things etc.

BOAT UP TO DATE AND READY FOR NAVIGATION
The boat will be sold with an engine overhaul (drain, filters, anodes)
As well as handling if desired by the new owner

Contact data

Logo

Contact:
XBOAT
Mr. Company Xboat
29 Boulevard de la Ferrage
06400 Cannes
France
Languages:
English, Spanish, French
https://www.xboat.uk
Fields * are required.
Your email has been sent.
Fields * are required.
x
OK